A handful of good cnc cutting service photos I discovered:
Connection to slab transistion disc
Image by Caliper Studio
Center stringer comfort stair connects two office floors in Starret Lehigh developing. Stringer and slab edge assemblies are blackened. Twenty 4 stainless steel treads are welded to the stringer kind a continuous ribbon. 1 1/4" diameter handrail posts are continuous bent "C" shapes that wrap about treds and are welded to stringer. Stair was delivered to website in one piece [24′ extended 3′ wide 3′ tall @ 2000lbs. Glass is two 1/2" layers of low iron tempered glass with PVB interlayer. Every single panel is a 148.375"x41.25" rectangle that weighs 522lbs. Cut out in concrete floor is trimmed with a box of 1/2" thick blackened steel that was fully prewelded in the shop. The box picks up the load at leading of stair and serves as a custom base shoe for the glass.
Design by Diller Scofidio + Renfro
Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan & partners for engineering services.
Stainless Tread Ribbon
Image by Caliper Studio
Center stringer convenience stair connects two workplace floors in Starret Lehigh creating. Stringer and slab edge assemblies are blackened. Twenty four stainless steel treads are welded to the stringer type a continuous ribbon. 1 1/4" diameter handrail posts are continuous bent "C" shapes that wrap about treds and are welded to stringer. Stair was delivered to web site in a single piece [24′ extended 3′ wide 3′ tall @ 2000lbs. Glass is two 1/2" layers of low iron tempered glass with PVB interlayer. Each and every panel is a 148.375"x41.25" rectangle that weighs 522lbs. Cut out in concrete floor is trimmed with a box of 1/two" thick blackened steel that was totally prewelded in the shop. The box picks up the load at best of stair and serves as a custom base shoe for the glass.
Design by Diller Scofidio + Renfro
Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan & partners for engineering services.
handrail to stringer just before weld
Image by Caliper Studio
Center stringer convenience stair connects two workplace floors in Starret Lehigh constructing. Stringer and slab edge assemblies are blackened. Twenty 4 stainless steel treads are welded to the stringer type a continuous ribbon. 1 1/four" diameter handrail posts are continuous bent "C" shapes that wrap about treds and are welded to stringer. Stair will be delivered to internet site in one piece [24′ lengthy 3′ wide 3′ tall @ 2000lbs].
Style by Diller Scofidio + Renfro
Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan & partners for engineering services.